Choosing the Right UPVC Door Handle Replacement
It's simple to replace your handles made of upvc, but choosing the right handle can be a bit difficult. Modern double-glazed handles come with spring cassettes, however older handles aren't.
If the handle of your upvc is loose and floppy, there could be a problem with the internal parts of the multipoint lock. This article will discuss the various possible issues and their causes.
Handles that sag or droop
uPVC handles are susceptible to wear and wear and. This is especially the case in older properties. The most frequent reason the handle becomes floppy due to a broken spring cassette inside the door lever. This is usually caused by excessive force and the square spindle that holds the cassette can become displaced or round off.
upvc replacement door handles is that a uPVC door handle replacement is a relatively simple job and can be done within a couple of minutes. The first step is to remove the old handle by unscrewing the fixing screws that are visible on the side of the lever plate. After the handles have been removed, you can remove the screws and replace the cassette.
You can find a vast range of uPVC door handles to select from online, and many of them come in different finishes. The finish you choose will determine the longevity of your handle and how it is easy to clean. Finishes like PVD, Stainless Steel or Resista are made to withstand corrosion and will last up to 25 years.
After selecting a colour or style, you are able to choose the type of handle you require. The most popular types are the lever and pad configurations. Lever pads are often used to prevent unauthorised access. They are equipped with a lever inside and a paddle out.
The next step is to measure the dimensions of your current handle and write them down. You'll need the PZ dimension (the distance from the screw hole to the centre of the lever) as well as the length of the handle, and the size of the keyhole. You can compare the measurements to the handle size matrix to find the correct replacement.
Broken springs
Over time, the handles of uPVC doors can get loose or wobbly and sometimes the spring cassette inside might break. The tiny springs bring the handle lever to a horizontal position. without them your doors will not lock properly.
Modern uPVC handles come with these cassettes incorporated directly into the back plate. However older uPVC doors often have these springs built into the lock mechanism. This isn't something that can be fixed on your own, but it's worth contacting your locksmith to look at as this could be the reason behind the drooping or sagging uPVC door handles.
One of the most common issues that is commonly encountered with uPVC door handles is that they become loose or wobbly over time, and this is typically due to worn-out springs, which is easily fixed. The majority of the time it is due to excessive use of the handle, and because of that the square spindle in the handle will wear out and the springs will shift out of position.
To correct this issue, open the door and remove the fixing screws at the back of the handle plate. This can be done by using the Philips screwdriver. Once the screws are removed, the handle can be removed and the plates pulled apart carefully. The springs that were used before can be removed and replaced with new ones.
Depending on the type of handle you are using the distance between the two fixing screws may differ and it is essential to know before buying a replacement. This measurement is known as the PZ measure. It is recommended that this measurement is done using an accurate tape measure for accuracy.
After replacing the springs you should be able operate the handle without any problems. However, it's always important to grease the internal mechanism to make sure that everything functions just as it should. This will ensure that your uPVC door is as secure as it could be, and improve their comfort in the long run.
Handles that slide around
Handles that slide could be caused by a variety of things. One of the most common causes is that the levers of the handle are not aligned with the lock. This can happen on both uPVC and composite doors, however it is generally more noticeable on older doors since they are often made from cheaper materials that don't stand up well to the elements.
This issue can be resolved by a professional, who will realign the handles and ensure that they are in line with the door lock. They'll also examine the lock to see what requires fixing. In many cases, a small adjustment to the springs of the handle can fix the issue.
Changing your uPVC door handle is simple enough, but you need to take the measurements of the handles you have in place to ensure that you have the proper size replacement. You'll need to take measurements of the distance between the two fixing screws as well as the size of the lever as well as the key-hole position. You can then use this uPVC handle size guide to determine the correct replacement for your home.
After you have taken the measurements, you can remove the old uPVC handle. It is usually quite easy and requires just a screwdriver reach the screws that are on the inside of the door. Once the screws have been removed, you will need to unscrew the handle and then put in the new handle.
It is important to secure the door using an appropriate wedge prior to beginning. This will prevent it from closing during the course of your work. After removing the handle, you will be able to access the parts beneath the door that cause the door to move.
If you don't have the time or nerves to tackle this task yourself, a handyman from Fantastic Services can help. They will employ specialist locksmith opening methods to unlock the door without causing damage and will then replace the handle that is damaged and make sure that everything is in place and functioning exactly as it should.
Gearbox damaged
A damaged gearbox could cause the upvc door handle to become stiff or lose its functionality. This can also prevent the lock from being able to be opened with the use of a key. This is extremely dangerous and should be dealt with as soon as possible. If you are unable solve the issue on your own, it is important to get in touch with a locksmith because they have the experience and tools necessary to get the job done correctly.
The first step is to remove the handle from the cover plate. You can do this using a screwdriver that has a flat-headed tip. After you have removed the handle, you are able to remove the middle screw that holds the cylinder in position. After removing the middle screw, you'll be able loosen the two screws that secure the barrel. Then, you can pull the barrel out of the door. You'll have to prop the door open to do this, so make sure you have someone on hand to assist.
After taking the cylinder off and replacing it with a new cylinder. Make sure the new cylinder is the exact dimensions as the old one. You could end up with an incorrectly aligned handle. This can lead to a myriad of problems, such as leaks and draughts.
A lot of doors made of upvc have adjustment slots that can be used to tighten or loosen the handle. These are usually located on the inside of the door close to where the handle joins the cylinder. The slots for adjustment can be tightened using an allen wrench. Once you have made the adjustments you can place the handle back in place and screw it into. Then, you can test the handle to make sure it's working correctly.
The upvc door handle becoming floppy when closed is usually an indication that the gearbox or internal spring components have broken down. This could cause your multipoint locks made from upvc to fail, leaving your door wide open to intruders. If this occurs, it is necessary to replace the upvc gearbox. The cost will range from PS145 to PS280, including labour.